24. Check that the appliance is OFF ( )
before plugging cord into wall socket.
To disconnect, turn the control to
OFF ( ); then remove plug from wall
socket. To unplug, grasp the plug and
pull from the socket. Never pull from
the power cord. Do not attempt to
defeat jar pad interlock sensor.
25. CAUTION! In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
26. This appliance is intended to be
used for commercial applications, for
example in kitchens of restaurants,
canteens, hospitals and in commercial
enterprises such as bakeries,
butcheries, etc., but not for continuous
mass production of food.
For HBH550R Series
WARNING: Light indicates ready to operate. Avoid any contact with blades or
moveable parts.
For HBH550R Series
104
SAVE THESE IN STRUC TIONS
104
For HBF600R-CE Series
108
27. When blending hot liquids, remove
filler cap or dosing cup of the two-
piece lid and close any lid openings
along the edge intended for pouring.
Hot liquids may push lid off jar during
blending. To prevent possible burns:
Do not fill blender jar beyond the
32 ounce (.9 L) level. With the
protection of an oven mitt or thick
towel, place one hand on top of lid.
Keep exposed skin away from lid.
Start blending at lowest speed.
28. Be careful if hot liquid is poured into
the blender container as it can be
ejected out of the appliance due to a
sudden steaming.
29. This appliance is intended for short
periods of operation under maximum
load, with a rated operating time of
3 minutes.
For HBH650R Series
105
106
108
106
109
107
5