Hamilton Beach Commercial HBH550R Serie Manual De Operación página 3

Blender Safety
Safety Alert Symbols
The following safety alert symbols are used throughout this manual to alert you to the safety hazards
described below.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word "WARNING." This word
means:
wWARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
wWARNING
Electrical Shock Hazard
Disconnect power before cleaning blender
base.
Failure to follow these instructions can result
in death or electrical shock.
wWARNING
Electrical Shock Hazard
Plug into a grounded socket.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Noise Level
The equivalent continuous sound level when equipment is
operating at maximum speed on no-load is less than
81 dB(A).
Your safety and the safety of oth ers is very important.
You can be killed or se ri ous ly injured if you don't
follow instructions.
wWARNING
The blending blade is sharp.
Always place lid on container when blending.
Do not put hands, spoons, or other utensils in
container when blending.
Failure to follow these instructions can result
in broken bones, cuts, or other injuries.
For Commercial Use Only
Technical Services
For assistance or replacement parts, call or email
Technical Services:
USA, Canada: 866-285-1087 or +1-910-693-4277,
commercial.support@hamiltonbeach.com
Mexico: 800 71 16 100,
mexico.service@hamiltonbeach.com
APAC Region: +86-400-930-2722,
hbcapac.support@hamiltonbeach.com
www.hamiltonbeachcommercial.com
Cut Hazard
3