Oil Change - GENERGY ISASA Instrucciones De Uso

8.1 Oil change.

1 Keep the engine running during 5 to 10 minutes for the oil to reach some
temperature and reduce its viscosity (more liquid). This way it will be easier to
extract it completely.
2 Place an appropriate container and tilt the equipment so the used oil is
completely drained.
3 Unscrew the oil draining screw/cap by turning counter clockwise and allow all
the spent oil to pour out.
OIL DRAINING SCREW/PLUG
4 Set the draining screw/cap and open the oil filling plug.
5 Refill the recommended oil (see page 8) to a level close to the maximum
level (without exceeding it). If the machine is leveled, the oil should not exceed
the level. The approximate oil amount is 0.4L.
OIL FILLING CAP
MAXIMUM LEVEL
18