Tabla de contenido
Publicidad
CRN4500
Item No. 65690
12
OPERATINg ThE NAILER
CONNECTIONS
fittings
ƒ Install a female coupler to the hose. The female coupler
will connect to the quick release that fits the tool.
1
1
filter-Regulator-Lubricator
ƒ Never connect nailer to pressure that potentially exceeds
150psi.
ƒ Filter-regulator-lubricator units supply an optimum
condition for the nailer and extend the nailer life. These
units should always be used.
filter
ƒ The filter removes moisture and dirt mixed in
compressed air.
ƒ Keep the filter clean by maintaining tool regularly.
2
2
ƒ Drain daily.
Regulator
ƒ The regulator controls the operating pressure for safe
operation of the nailer.
ƒ Inspect the regulator before operation to be sure it
operates properly.
Lubricator
ƒ The lubricator supplies an oil mist to the nailer.
ƒ Inspect the lubricator before operation to be sure the
supply of lubricant is adequate.
3
ƒ If an inline lubricator is not used, a few drops of oil will
3
need to be added to the air inlet before each use.
Air hose
ƒ Air hose must have a minimum working pressure rating
of 200psi or 150% of the maximum pressure produced in
the system, whichever is higher.
Interchange Brands Coil Nailers: Operator's Manual
Publicidad
Tabla de contenido
