Publicidad
Idiomas disponibles
Idiomas disponibles
If the oven is to work properly, the kitchen housing
must be suitable. The panels of the kitchen unit that
are next to the oven must be made of a heat resistant
material. Ensure that the glues of units that are made
of veneered wood can withstand temperatures of at
least 120°C. Plastics or glues that cannot withstand
such temperatures will melt and deform the unit, once
EN
the oven has been lodged inside the units, electrical
parts must be completely insulated. This is a legal
safety requirement. All guards must be firmly fixed into
place so that it is impossible to remove them without
using special tools. Remove the back of the kitchen
unit to ensure an adequate current of air circulates
around the oven. The hob must have a rear gap of at
least 45 mm.
When you have unpacked the oven, make sure that
it has not been damaged in any way. If you have any
doubts at all, do not use it: contact a professionally
qualified person. Keep packing materials such as
plastic bags, polystyrene, or nails out of the reach of
children because these are dangerous to children.
EN-06
Publicidad
