AERMEC ANKI Manual De Uso página 20

5 USER SET MENU
Access to the list of parameters on entering the user menu:
N. Code
U00 StA
U01 StF Cooling setpoint (°C)
U02 bnF Cooling band (°C)
U03 StC Heating setpoint (°C)
U04 bnC Heating band (°C)
U05 CSt Correction set
U06 SF1 Cooling setpoint 1 (°C)
Outside air temperature at
U07 tF1
U08 SF2 Cooling setpoint 2 (°C)
Outside cooling air
U09 tF2
temperature 2 (°C)
U10 SC1 Heating setpoint 1 (°C)
Outside heating air
U11 tC1
temperature 1 (°C)
U12 SC2 Heating setpoint 2 (°C)
Outside heating air
U13 tC2
temperature 2 (°C)
U14 SAS Domestic water setpoint (°C)
U15 bAS Domestic water band (°C)
20
Name Min Default
Season 0 0
5.0 7.0
0.0 5.0
25.0 45.0
0.0 5.0
0 0
-30.0 12.0
-30.0 18.0
cold 1 (°C)
-30.0 7.0
-30.0 30.0
-30.0 45.0
-30.0 0
-30.0 35.0
-30.0 18.0
25.0 70.0
0.0 10.0
Max
If 0 - the machine works in cold mode, unless the contact operating mode is forced.
If 1 - works in hot mode. If this parameter is changed while the machine is
1
operating, it is automatically switched off and switched on again with the
operating mode selected.
20.0 Setpoint temperature used in the cooling mode
20.0 Temperature band used with cooling mode
Setpoint temperature used in the heating mode:
The maximum limit can be configured using the parameter(t) in the menu with
Parameter N23 PSW=30;
The maximum limit becomes 70° if the parameter(8) =4 to allow setpoint entry to
adjust the boiler.
20.0 Temperature band used with heating mode
Parameter indicating activation of set correction based on outside temperature:
0: no correction on set
1: correction on set in the cooling mode
3
2: correction on set in the heating mode
3: correction on heating and cooling set
The setpoint is calculated every 30 min
Visible only with the setpoint correction enabled. Set to cold 1 = temperature as
145.0
per parameter 7
Visible only with the setpoint correction enabled. Outside air temperature 1
145.0
corresponds to set at cold 1 parameter 6
Visible only with the setpoint correction enabled. Set to cold 2 = temperature as
145.0
per parameter 9
Visible only with the setpoint correction enabled. Outside air temperature 2
145.0
corresponds to set at cold 2 parameter 8
Visible only with the setpoint correction enabled. Set to hot 1. Set to hot used as
first extreme between which the set can be changed:
The maximum limit can be configured using the parameter(t) in the menu with
145.0
PSW=30;
The maximum limit becomes 70° if the parameter(8) =4 to allow setpoint entry to
adjust the boiler.
Visible only with the setpoint correction enabled. Outside air temperature
145.0
corresponds to set at hot 1 (parameter A)
Visible only with the setpoint correction enabled. Set to hot 2. Set to hot used as
second extreme between which the set can be changed.
The maximum limit can be configured using the parameter(t) in the menu with
145.0
PSW=30;
The maximum limit becomes 70° if the parameter(8) =4 to allow setpoint entry to
adjust the boiler.
Visible only with the setpoint correction enabled. Outside air temperature
145.0
corresponds to set at hot 2 (parameter C)
Setpoint temperature used when the production of domestic water is enabled:
The maximum limit can be configured using the parameter(t) in the menu with
Parameter N23 PSW=30;
The maximum limit becomes 70° if the parameter(8) =4 to allow setpoint entry to
adjust the boiler.
20.0 Temperature band used with the domestic water mode setpoint.
Meaning