Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Install the data cable (1) to the control box connection
(2). Ensure the arrows on the data cable and control
box connection are aligned to one another to ensure
proper installation. Ensure they are tightly connected
by firmly pushing together. Secure the connection by
hand tightening the nut (3) in a clockwise direction
onto the threaded sensor cable.
NOTE: The side of the control box (G) with "in" and
"out" showing must face the front of the cabinet (away
from the back of the cabinet). If the connections are
not made properly, the sensor feature will not work.
4a. Connect the hose (1& 2) to the connector (3 & 4) on the
control box (G). Push firmly together until they snap into
place.
3
G
4a
6
1
1
2
1
3
G
4
2
3
Publicidad
