Publicidad
Idiomas disponibles
Idiomas disponibles
1.2 In the box
1 x Smartwatch
1 x USB-A cable with wireless charging base (60 cm)
2 x Straps (1 silicon and 1 stainless-steel)
1 x Adjustment tool
1.3 Diagram
1. Screen
2. Strap attachment
3. Power button
4. Microphone
5. Dial/Menu button
1.4 How to attach and remove the straps
The Titanium smartwatch includes 2 straps (formal and
sport). Here is how both attachment and removal systems
work and how to shorten or elongate the formal strap:
Sport strap
- To remove a strap: Hold the strap and carefully slide the
metal piece out of its hole.
- To attach a strap: Hold the strap and insert the metal piece
on one end. Then, slide the metal piece on the other end and
insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
Formal strap
- To remove a strap: Hold the strap and carefully slide the
metal piece out of its hole.
- To attach a strap: Hold the strap and insert the metal piece
on one end. Then, slide the metal piece on the other end and
insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
How to shorten or elongate the formal strap
- To shorten the strap:
1. Remove the strap from the watch's case.
2. Rotate the alignment tool counterclockwise to make
space for the strap piece that you want to take out to fit.
3. There are three arrows at each end of the strap. Select the
desired piece and align its hole with the pin of the alignment
tool.
4. Rotate the tool clockwise until its pin is completely
inserted in the hole and the metal pin that was inside the
strap piece comes out.
6. Back button
7. Smart sensors
8. Magnetic charging port
9. Speaker
Publicidad
