Publicidad
Idiomas disponibles
Idiomas disponibles
The BLADE can not
move smoothly.
The length of the tape
is different from the
set length.
Tape curls
excessively.
If the machine still can not operate properly, stop using the machine immediately and
contact vendor for repair authorization.
Warranty
We warrant to the original purchaser of the product that it will be free from defects in material or
workmanship for as long as the original purchaser owns the product, when given normal wear and
proper usage.
The spare parts such as Cutting Blades, Rollers, are not covered under the warranty period as they are
considered as "wear parts"This warranty is only valid if the product:
Was not damaged while being installed.
Was operated in accordance with product's specifications,instructions and any technical support
directions.
Was not modified or damaged by tempering, user error, accident.disaster,abuse,misuse,power supply,
power application,alternation, repair, modification, a fix or replacement by someone other than the
original product.
The BLADE UNIT is not in
a proper position.
The adhesive of tape is too
strong.
The elasticity of tape is too
strong.
The machine is not
grounded.The ROLLER
LOCK is disengaged
This product is subject to the provision of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the
product requires separate refuse collection in the European Union. This
applies to the product and all accessories marked with this symbol. Products
marked as such may not be discarded with normal domestic waste, but must
be taken to a collection point for recycling electrical and electronic devices.
Check the BLADE UNIT and push down on
the housing firmly.
Correct the setting after cutting several test
pieces
Check ground on cord.
Engage the ROLLER LOCK to apply tension.
- 14 -
Publicidad
