GE Profile PNM22L Instructivo Y Advertencias página 69

CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To reduce the risk of electric shock
or injury during installation, you must first unplug the
refrigerator before proceeding. Failure to follow these
instructions can result in electrical shock.
LOADING THE REFRIGERATOR
1
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded
hand truck. Center the refrigerator on the
hand truck and secure the strap around the
refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
REMOVE THE BASE GRILLE
2
Remove the grille by removing the two
Phillips head screws.
If the refrigerator must go through any
entrance that is less than 38" wide, the
doors must be removed. Proceed to Step 3.
DO NOT remove the handles.
If all entrances are more than 38" wide, skip
to Installing the Refrigerator.
DISCONNECT THE WATER
3
COUPLING (on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into the
bottom hinge on the freezer door that must be
disconnected.
To disconnect, push in on the white collar of the
coupling and pull out the tubing.
Bottom
freezer
hinge
69
White collar