Publicidad
Idiomas disponibles
Idiomas disponibles
15. Plug adapter directly into an AC outlet. Do not use an
extension cord. Failure to comply with these warnings could
result in fire or serious injury.
16. WARNING: During use, do not place or leave appliance
where it may be 1) damaged by an animal or 2) exposed to
the weather.
17. WARNING: Keep the appliance dry.
18. Close supervision is required when this appliance is used
by, on, or near children, or persons with limited physical,
sensory, or mental capabilities or invalids.
19. Always attach plug to charging mat first, then to outlet. To
disconnect, remove plug from outlet.
20. WARNING: For the purpose of recharging the battery, only
use the detachable supply unit provided with this appliance.
21. WARNING: Cutting blades may become hot after
prolonged use.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
The battery pack must be removed from the appliance before it is recycled. The battery
pack is to be recycled as a lithium-ion battery.
CHARGING CLIPPER USING CHARGING MAT
The AC adapter is intended for use with Andis model CCA charging mat with a rated
capacity of 12V
the carton. Plug the charging mat cord into the receptacle on the back of the
AC adapter. Plug the AC adapter into a 120V AC outlet, or according to your local
power standards. The emblem on the charging mat should be in the raised position
before placing the clipper on the charging mat. To do this, please push the emblem
up from the bottom of the charging mat. Place clipper on the charging mat. (Fig. A)
The charging mat emblem should align to the magnetic emblem on the back of the
4
1A. Remove the clipper, charging mat and AC adapter from
Publicidad
