MSW Motor Technics MSW-GDOOR-002A Manual De Instrucciones página 74

NOTE: If there is no operation under the remote control learning status for 20 sec.,
system will automatically exit the setting and save all the paired remote controls.
PEDESTRIAN MODE ON REMOTE CONTROL (L3)
Pedestrian mode function: when gate is closed, press the Pedestrian button on the
remote control, the gate will open 1m wide to allow pedestrian access.
Operation instruction:
• Press and hold "-" button for 3 sec. to enter into remote control management
mode. The indicator light L1 will be steady on.
• Press "+" button twice to select pedestrian mode function. The indicator light
L3 will be steady on.
• Press "SET" button once to enter into pedestrian mode setting. All indicator
will flicker repeatedly from L1 to L5.
• Press the button which is to be paired on the remote control once. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and go
off. Learning is complete thereafter.
REMOTE CONTROL DELETE (L4)
This operation will delete all the remote controls that are paired to this control
board.
Operation instruction:
EN