MSW Motor Technics MSW-GDOOR-002A Manual De Instrucciones página 90

• Press and hold "PROG" button for 3 sec. to enter into basic menu. The
indicator light L0 will flicker once, then L1 will be steady on.
• Press "PROG" button again for 3 sec. to enter into advanced menu. L0 will
flicker twice, then L1 will be steady on.
• Press "PROG" button for 3 sec. for the third time to enter into other menu
setting. L0 will flicker three times, then L1 will be steady on.
• Press "+" button twice to select buzzer setting option. The indicator light L2 will
be steady on.
• Press "SET" button once to enter into buzzer setting. The indicator light L1 on
or off will indicate the current setting value. (Default is L1 off).
• Press "+" or "-" button to enable or disable the buzzer. The indicator light L1
off: enable; on: disable.
• Press "SET" button once to save and system will automatically exit. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and off.
NOTE: The buzzer cannot be disabled when powered by battery.
BATTERY LEVEL CHECKING
The current battery level can be checked through the indicator lights. When the
battery power is low (battery voltage <11.3V), the gate opener will stop running to
protect the battery being damaged. Under such circumstance, users may have to
unlock the gate opener first, then move the gate by hand.
Operation instruction:
EN