5....-05-SMS 2759 neu
Attachment
GB
Beater disk (6)
Whisk (9)
Multiple blade (7)
Chopping blade
(14)
Using the Mixing Rod and Whisk
1. Make sure that the plug is not inserted! Insert one of the supplied metal attach-
ments (6/7) in the shaft of the mixing rod (4). Make sure that the pin located on
the shaft fits into the slot of the attachment. Only in this case can the attach-
ment be inserted completely onto the shaft! Lock the mixing rod into place by
turning once. The marker dots are now positioned one above the other.
2. If you would like to use the whisk (9), replace the mixing rod by the adapter
(10). Lock the whisk into place by applying moderate pressure to the driveshaft
of the adapter.
3. Fill the food to be mixed into the mixing bowl ((5) max. 0.6 litres). The mixing
rod or whisk should be fully immersed.
4. Use the regulator (1) to set the corresponding speed. Please refer to the table.
5. Hold the device in such a way that you are able to operate the two-level control
switch (2) with your fingers.
6. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
7. Press one of the buttons of the two-level control switch.
8. You can achieve pulse operation by pressing the button at intervals and then
releasing it.
42
15.01.2003 9:55 Uhr
Function
For mixing and stirring milk-
shakes, drinks, omelette
batter, sauces and cosmetic
emulsions
For beating cream, egg white
(max. 4 egg whites) and
blancmange and whipping up
sauces, sponge cake mixture
and other airy and foamy
foods
With the addition of liquid
can be used for chopping,
mincing and pureeing boiled
vegetables, soft fruit and
baby food and for the
straining of soups and
sauces
For cutting, chopping or
mincing raw or cooked meat
and hard-fibred vegetables
Seite 42
Speed
Operating
Time
Level
, set
max.
speed control to
3 min.
1–2.
Level
, set
max.
speed control to
4 min.
2–4.
Level
, set
max.
speed control to
3 min.
1–5 or level
.
Level
, set
max.
speed control to
3 min.
1–5 or level
.