Publicidad
6.
40°C - 104°F
0°C - 32°F
70
6.
Display
Description of the error
The docking station is not connected to the mains. Please connect the
base to the mains.
The robot is unable to locate its
The docking station is not easily accessible due to the cluttered floor
1032
docking station
space.
Ensure the robot has easy access by clearing any clutter around the
docking station.
The battery power is weak and the robot is not able to return to the
The robot will turn off due to low
2001
docking system. Return the robot manually to the docking station in
battery power
order for it to recharge.
The robot is no longer positioned
The robot is not at ground-level.
2010
on the ground
Please place the robot on the ground.
One of the wheels is jammed and is not working properly.
2020
One of the robot's wheels is jammed
Turn off the robot and remove the blocking element.
The robot is unable to properly turn on. Call the after-sales service
2021
The vacuuming motor is jammed
centre, quoting error code 2021.
The power-brush is not working correctly.
The power-brush is jammed/
Turn off the robot and remove the blocking element.
2022
blocked
Remember to clean the power-brush using the tool provided to
remove hair.
The robot is blocked.
2024
The robot is unable to find its route
Move the robot, repositioning it in an uncluttered space and re-start
the vacuuming. Move the robot.
The robot has a problem with its
The fall sensors are dirty. Clean the fall sensors with the cloth provided.
2025
fall sensors
The robot is jammed at the top of the stairs. Move the robot.
The robot cannot start without its dust collector.
The robot's dust collector is not
2030
Attach the dust collector and its filter properly.
attached
Place the dust collector and filter inside the appliance.
The robot's navigation sensors are
The robot is unable to properly turn on. Call the after-sales service
2040
damaged
centre, quoting error code 2040.
The robot is unable to properly turn on. Call the after-sales service
2041
The robot's gyroscope is damaged
centre, quoting error code 2041.
Switch off and switch on the robot and put it back on the docking
2050
The robot faced an issue
station. After booting, the robot will be ready for any command.
The robot does not have sufficient battery power to turn on.
Place the robot on the docking station; ensure the ON/OFF switch
The robot does not turn on
under the robot is in the OFF position.
Set the switch to the ON position.
Possible cause/solution
71
Publicidad
