Bosch HEZ39050 Manual De Usuario página 10

en Environmental protection and saving energy
2 Environmental protec-
tion and saving energy
2.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
3 Before the first use
In order to be able to use the cook-
ing functions, you must pair the wire-
less cooking sensor to the control
panel. You can find further informa-
tion in the section on cooking func-
tions in the user manual for your hob.
3.1 Scope of delivery
After unpacking all of the parts,
check for any transport damage and
for completeness of delivery.
Wireless cooking sensor
¡
Silicone patch
¡
Template
¡
→ Fig.
1
3.2 Attaching the silicone
patch
The silicone patch secures the cook-
ing sensor to the cookware. For fit-
ting on the cookware:
The adhesive area on the cook-
1.
ware must be free from grease.
Clean and dry the container thor-
oughly, and rub the adhesive area
using alcohol, for example.
10
Remove the protective film from
2.
the silicone patch. Adhere the silic-
one patch to the outside of the
cookware in the correct place us-
ing the enclosed template as a
guide.
→ Fig.
2
Press down all over the surface of
3.
the silicone patch, including in the
centre.
Leave the adhesive to dry for one
4.
hour. Do not use or rinse out the
cookware during this time.
Note: If the silicone patch comes
loose, use a new one. If required, you
can purchase a set with five silicone
patches from specialist retailers, from
our customer service or on our offi-
cial website www.bosch-home.com
by quoting the article number
17007119.
All adhesives break down over time
when they are stored. To prevent this
from happening, place the silicone
bases on their containers as soon as
they are cleaned.
3.3 Attaching the wireless
cooking sensor
Ensure that the silicone patch is
1.
completely dry before attaching
the cooking sensor.
Attach the cooking onto the silic-
2.
one patch so that it fits perfectly.
→ Fig.
3