Beta 1984 20V/600BMC Manual De Uso E Instrucciones página 11

OPERATION MANUAL AND INSTRUCTIONS
To connect the impact wrench to the battery, slide the tool base onto the battery rails until it is fully inserted:
To disconnect the battery, press battery unlocking button (4) and slide the base of impact wrench 1984 20V/600Nm into place:
Disconnect the battery after each use and charge it in the battery charger.
Charge the batteries with a Beta battery charger, and follow the related instructions.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre through your Beta dealer.
DISPOSAL
The cordless impact wrench, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws
in force in your country.
WARRANTY
This impact wrench is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty
for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects, by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty
will no longer be valid if any changes are made, when the cordless impact wrench is forced or sent to the customer service in
pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of the following
Directives and amendments thereto:
• Machine Directive 2006/42/EC;
• Electromagnetic Compatibility Directive (EMC) 2014/30/EU;
• Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 2011/65/EU.
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
DECLARATION OF CONFORMITY

Date: 25/01/2022
EN
11