CST/BERGER 56-DGT2 Manual De Instrucciones página 19

DISPLAY OPERATING RANGE
Operating voltage
required
Operating time
(Alkaline batteries)
Operating Temperature range
SIZE
WEIGHT
** Standard deviation based on DIN18723.
WARRANTY
ONE Year Warranty. CST/Berger, a division of Stanley Works, warrants this electronic measuring
tool against deficiencies in material and workmanship for a period of one year from the date of
purchase. Deficient products will be repaired or replaced at CST/Berger's option. Proof of
purchase is required.
For warranty and repair information, contact:
Your Local Distributor, or CST/Berger.
This Warranty does not cover deficiencies caused by accidental damage, wear and tear, use other
than in accordance with the manufacturer's instructions or repair or alteration of this product not
authorized by CST/Berger.
Repair or replacement under this Warranty does not affect the expiry date of the Warranty. To the
extent permitted by law, CST/Berger shall not be liable under this Warranty for indirect or
consequential loss resulting from deficiencies in this product.
Agents of CST/Berger cannot change this warranty.
This Warranty may not be varied without the authorization of CST/Berger.
This warranty may provide you with additional rights that vary by state, province or nation.
IMPORTANT NOTE: The customer is responsible for the correct use and care of the instrument.
Moreover he is completely responsible for checking the job along its prosecution, and therefore for
the calibration of the instrument. Calibration and care are not covered by warranty.
4-6 VDC
(4) AA Batteries
15 hrs continuous use
@ 20°C (68°F)
-20° to +50°C
(-4° to +122°F)
150x160x320mm
4.4Kg inst only
6.8 Kg w/case
Subject to change without notice
4-6 VDC
(4) AA Batteries
15 hrs continuous use
@ 20°C (68°F)
-20° to +50°C
(-4° to +122°F)
145x200x300mm
4.4 Kg inst only
6.8 Kg w/case
DGT2 - DGT10 • 19