CST/BERGER 56-DGT2 Manual De Instrucciones página 8

Operating Keys
KEY
SYMBOL
R/L
HOLD
V%
0SET
Power ON/OFF
8 • DGT2 - DGT10
FUNCTION
Setting horizontal
angle rotational
direction
Locking horizontal
angle reading
Illuminating the|
display and the
crosshairs
Vertical angle to
percent of grade
Zero the horizontal
angle reading
OPERATION
Used to switch horizontal angle between clockwise
rotation (HR) and counterclockwise rotation (H L).
The direction changes each time the button
Used to lock current horizontal angle into display. The
horizontal angle reading will flash when this button
is pressed. The instrument can be turned without
changing the horizontal reading. Pressing the
button again will unlock the horizontal angle display.
Used to light the display and crosshairs. Press to light
display and crosshairs, press again to shut
Used to switch the vertical angle display between
degrees/gons and percent of grade. The "%" sign
will be shown on the display when percent of grade
Used to zero the reading of the horizontal angle
display. Press to zero the reading at any point.
Used to turn the display on and off
is pressed.
off the light.
is active.