Publicidad
Idiomas disponibles
Idiomas disponibles
summer.
Occasionally clean the venting slots of the battery using a soft, clean
and dry brush.
A signifi cantly reduced working time after charging indicates that the
battery is used up. Replacement is needed.
Observe the notes for disposal.
Maintenance and Cleaning
□ Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories or storing power tools. Such preventive
safety measure reduce the risk of starting the power tool
accidentally.
□ For safe and proper working, always keep the product and
ventilation slots clean.
If the product should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by a Würth master-
Service.
In all correspondence and spare parts orders, please always include
the article number given on the type plate of the machine.
The current spare parts list for this power tool can be viewed in the
Internet under "http://www.wuerth.com/partsmanager" or be
requested from your next Würth branch offi ce.
Disposal
The product, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EU countries:
According to the European Guideline 2012/19/
EU for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
Noise/Vibration Information
Measured sound values determined according to EN 62841.
Typically the A-weighted noise levels of the product are: Sound
pressure level 102.0 dB(A); Sound power level 110.0 dB(A).
Uncertainty K=3 dB(A).
Wear hearing protection!
Overall vibrational values (vector sum of three directions) determined
according to EN 62841:
Vibration emission value ah = 15.9 m/s
(Impact tightening)
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications
of the tool. However, if the tool is used for diff erent applications, with
diff erent accessories or is poorly maintained, the vibration emission
may diff er. This may signifi cantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but
not actually doing the job. This may signifi cantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the
eff ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organise work patterns.
Subject to change without notice.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Adolf
Würth GmbH & Co. KG is under license. Other trademarks and
trade names are those of their respective owners.
, uncertainty K=1.5 m/s
.
2
2
19
Publicidad
