Publicidad
Idiomas disponibles
Idiomas disponibles
. Preparing the ice-cream maker
Before the first and each subsequent use, clean all loose parts (lid (1), stirrer (3)
and accessories), as well as the container (11) in the appliance with a soft cloth
and ordinary washing-up liquid.
Allow everything to dry thoroughly.
Place the ice-cream maker onto a level, non-slip and heat-resistant surface.
Place the container into the ice-cream mak-
er, on the drive shaft (2).
Place the stirrer on the container and en-
sure that the stirrer is seated on the drive
shaft (see Fig. 3).
Place the lid on the housing and turn it an-
ti-clockwise until it clicks into place.
Connect the appliance to a properly in-
stalled socket.
The display field lights up and
"PXXX" flashes on the display. The
display lighting switches off after 15
seconds. The appliance is now in
standby mode.
158
Fig. 3
Fig. 4
Publicidad
