RS Pro RS-9010 Manual De Instrucciones página 2

Introduction
Phase Rotation Indicator is a handheld instrument designed to detect
the rotary field of three-phase systems.
Safety Information
Caution identifies conditions and actions that may damage
the RS-9010
Warning identifies conditions and actions that pose hazard
to the user.
Read First: Safety Information
To avoid possible electric shock or fire, do the following:
Read the following safety information carefully before using or servicing
the instrument.
Adhere to local and national safety codes.
Individual protective equipment must be used to prevent shock and
injury.
Use of instrument in a manner not specified by the manufacturer may
impair safety features/protection provided by the equipment.
Avoid working alone.
Inspect the test leads for damaged insulation or exposed metal. Check
test lead continuity. Damage leads must be replaced. Do not use Phase
Rotation Indicator if it looks damaged.
Be careful when working above 30V ac rms, 42V ac peak and 60V dc.
Such voltages pose a shock hazard.
When using the probes, keep fingers away from probe contacts. Keep
fingers behind the finger guards on the probes.
Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
Verify operation prior to measuring hazardous voltages (voltages above
30V ac rms, 42V ac peak and 60V dc).
Do not use Phase Rotation Indicator with any of the parts removed.
Phase Rotation Indicator/English
1