Descargar Imprimir esta página

Royal Catering RCSL 2/12A Manual De Instrucciones página 33

Maquina granizadora

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
• The two/three light indicators during operation will be lit in cycles, and the
display shows the working status and parameters for each tank
correspondingly.
• The digital display shows on the left the present operation status in auto-
mode and on the right the present temperature of the batch for the
corresponding tank.
• POWER – press it to turn on the machine but the display will be off (standby
mode). While operating pressing it for 1 second will turn off the machine.
• SET - pressing this button will call up the set parameters.
• LIGHT – press that button to turn on or off tank illumination.
• In the standby state (OFF), pressing the CLEAR button turns the
corresponding gear motor on; then press the AUTO button and it enters the
slush mode; then press the AUTO button and it enters the cold drink mode;
then press the AUTO button and the machine returns to the standby mode.
• Long press the LIGHT button to view the light module voltage value.
3.3.3 Preparing slush
• NOTE: use only portable water for drink preparation.
• Load the tank(s) and press POWER button to turn on the machine.
• Press the corresponding AUTO function button and the display shows "SLU"
which means that the machine has entered slush production mode
• [optional] Wait at least 3 minutes (compressor protection function) before
pressing AUTO button for changing machine status or turn it off, when it is
running. As a result of pressing this button again the display will show "SLU",
"JUE", "CLR" or "OFF" commands.
• When the slush production is completed, the corresponding indicator light(s)
will continuously flash.
3.3.4 Preparing a cold drink
• NOTE: use only portable water for drink preparation.
• IMPORTANT: use this function also for a "storage mode" that is when the
beverage shall be left in the tank for a night.
• Load the tank(s) and press POWER button to turn on the machine.
• Press the corresponding AUTO function button and the display shows "SLU"
which means that the machine has entered slush production mode
• Press the AUTO button again until the display shows "JUE". Wait at least 3
minutes minutes (compressor protection function) before pressing AUTO
button for changing machine status or switch it off, when it is running. As a
EN

Publicidad

loading

Este manual también es adecuado para:

Rcsl 3/12a