Royal Catering RCSL 2/12A Manual De Instrucciones página 34

result of pressing this button again the display will show "SLU", "JUE", "CLR"
or "OFF" commands.
• By pressing the SET button the desired temperature can be set – see the
displayed value on the screen.
• When the juice reaches the set temperature, the corresponding indicator
light will continuously flash.
3.3.5 Tank cleaning function
• Add water or a mild cleaning solution and press POWER button to turn on the
machine.
• The agitator starts working.
3.3.6 Changing factory settings and failure codes
• Long press SET button for 3 seconds to enter the factory parameter setting
state. Pressing the SET key again switches between different parameters in a
loop order:
Default
Code
value
P1 5
P2 5
P3 5
P4 3
P5 5
P6 260
P7 180
P8 3
F1 -3
F2 -3
F3 -3
Parameter name
Left cold drink temperature
Middle cold drink temperature
Right cold drink temperature (Note: not
used in 3/12A model)
Temperature return difference value
Time when the compressor restarts again
High voltage alarm value
Low voltage alarm value
Voltage alarm enable value
Cold drink compensation temperature
value of the left cylinder
Cold drink compensation temperature
value of the medium cylinder
Cold drink compensation temperature
EN
Setting range
1℃ ~ 10℃
1℃ ~ 10℃
1℃ ~ 10℃
1℃ ~ 10℃
1~10MIN
230 ~ 265V
180 ~ 210V
0 - no alarm;
1 – low voltage
alarm enabled;
2 – high
voltage alarm
enabled;
Low and hi
voltage alarm
enabled
-10℃ ~ 10℃
-10℃ ~ 10℃
-10℃ ~ 10℃