LG WT18WVTM Manual Del Propietário página 70

global_main.book.book Page 27 Thursday, April 11, 2024 8:23 AM
Manual Washing
When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.
Rinse and Spin
1
l and p
Press the Proceso
2
(Process) button 2
times.
Press the Proceso
(Process) button for
3 3 seconds to adjust
the number of
rinses.
5
NOTE
• When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will
not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle
after the wash has completed.
• If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start.
However the water will still fill to the selected water level even if there is water already in the tub.
• If you do not select or change the water level, the water level will be set automatically.
Spin only
or
s
Press the POWER button.
p
Press the Proceso
(Process) button 1
time.
u
Press the START/PAUSE button to start the cycle(s).
OPERATION
Rinse only
t
l
Press the Proceso Press the Proceso
(Process) button 3 (Process) button 5
times.
Press the Proceso
(Process) button for
3 seconds to adjust
the number of
rinses.
27
Wash only
k
times.