Descargar Imprimir esta página

LG WT18WVTM Manual Del Propietário página 77

Publicidad

Idiomas disponibles

Idiomas disponibles

global_main.book.book Page 34 Thursday, April 11, 2024 8:23 AM
TROUBLESHOOTING
34
Symptoms
LE1
FOREIGN OBJECTS
ERROR
OE
WATER OUTLET ERROR
UE
UNBALANCE ERROR
tE
TEMPERATURE SENSOR
ERROR
FE
OVERFLOW ERROR
PE
PRESSURE SENSOR
ERROR
LE
MOTOR LOCKED ERROR
AE
CLUTCH ERROR
tcL
TUB CLEAN ALARM
Possible Cause & Solution
Foreign objects, such as coins, pins, clips, etc.,are caught between the
pulsator and the inner drum.
• Turn off the appliance and then press the POWER button. Press the
Proceso (Process) button 1 time for selecting spin only cycle and press the
START/PAUSE button. When the spin is complete, remove the clothes and
then find and remove any objects caught in the pulsator gap.
Drain hose is kinked, pinched, or clogged.
• Clean and straighten the drain hose.
Drain discharge is more than 1.2 m above the bottom of the appliance.
• Adjust the hose or reconfigure the drain pipe. Maximum drain height is 1.2
m.
Rebalancing operation is not successful.
• The automatic attempt to rebalance the laundry was not successful. The
cycle has been paused to allow the laundry to be manually adjusted.
The load is too small.
• Add more items to allow the appliance to balance the laundry.
Heavy items are mixed with lighter items.
• Wash items of somewhat similar weight.
The load is out of balance.
• Manually redistribute the laundry if laundry have become tangled.
Control error.
• Unplug the appliance and wait 60 seconds. Reconnect power and try
again.
• If the error code is still displayed, call for service.
Water overfills due to the faulty water valve.
• Close the water taps, unplug the appliance, and call for service.
The water level sensor is not working correctly.
• Close the water taps, unplug the appliance, and call for service.
A motor error has occurred.
• Allow the appliance to stand for 30 minutes and then restart the cycle.
• If the error code is still displayed, call for service.
Clutch error.
• Unplug the appliance and call for service.
The programme has run more than 30 times.
• Run the Limpieza de Tina (Tub Clean) function.

Publicidad

loading

Este manual también es adecuado para:

Wt19wvtmWt19dvtmWt19mvtm