Descargar Imprimir esta página

turbionaire ivy 60 wall Manual De Usuario E Instrucciones De Instalación página 29

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
9. CLEANING AND MAINTENANCE
To ensure optimal operation of the unit for a long period of time, clean and care carefully.
9.1 Cleaning products
ATTENTION!
Inappropriate cleaning agents can damage the surface of the unit.
Do not use sharp or abrasive cleaning agents.
Do not use cleaning agents with a high alcohol content.
Never use wire sponges or hard dish sponges.
Do not use special products for hot cleaning.
Use glass cleaners, glass scrapers or stainless steel care products only if they are
recommended in the cleaning instructions for the particular component.
Wash new cloths thoroughly before use.
9.2 Cleaning the unit
Clean the unit as directed to avoid damage to various components and surfaces from
improper cleaning with inappropriate cleaning products.
WARNING - Danger of explosion!
Strongly corrosive-alkaline or strongly acidic detergents can cause explosions in combination
with aluminum parts inside the dishwasher.
Do not use strongly corrosive-alkaline or strongly acidic detergents. Also, do not under any
circumstances use commercial or industrial detergents in combination with aluminum
parts, such as, for example, the grease filter.
WARNING - Danger of electric shock!
Moisture getting inside the unit can cause electric shock.
Before cleaning, remove the plug from the socket or disconnect the fuses from the
switchboard fuses.
Do not use pressure jet or steam jet cleaners to clean the unit.
WARNING - Risk of burns!
The unit heats up during operation.
Allow unit to cool before cleaning.
WARNING - Risk of injury!
Components inside the unit may have sharp edges.
Carefully clean the inside of the unit.
1. Follow the information on cleaning products.
2. Depending on the surface, clean as follows:
Clean stainless steel surfaces using a sponge and a hot water solution with dish detergent,
wiping in the direction of sanding.
Clean painted surfaces using a sponge and a hot water solution with dish detergent.
Clean aluminum surfaces using a soft cloth and glass cleaner.
Clean plastic surfaces using a soft cloth and glass cleaner.
Clean glass surfaces using a soft cloth and glass cleaner.
3. Wipe afterwards with a soft cloth.
4. For stainless steel surfaces, apply the stainless steel care product in a thin layer with a soft
cloth.
EN
29

Publicidad

loading

Este manual también es adecuado para:

Ivy 85 wall