Baby Jogger summit X3 Instrucciones De Ensamblaje página 12

FRAME
EN
1 Unpack the stroller frame from the box
and set the wheels aside.
2 Unfold the stroller by pulling the
Handlebar away from the frame and
pushing towards the floor until the
stroller clicks into place..
3 Place the stroller in the upright position.
WARNING: Ensure that all the locking
devices are engaged before use.
FRONT WHEEL
4 Installation
• Lay stroller on its back so the
handlebar is resting on the floor.
• Attach the front wheel by sliding it into
the front wheel mount until it clicks.
Gently pull on the front wheel to make
sure it is properly attached.
WARNING: The front wheel cannot
be removed from the front wheel
fork assembly. If the wheel becomes
damaged, please contact Baby Jogger
for a complete wheel assembly
replacement.
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount.
SWIVEL FEATURE
FOR WALKING ON UNEVEN TERRAIN:
6 Gently pull the swivel lock into the
upright position until it clicks into
place.
FOR JOGGING AND RUNNING:
7 Pull the front wheel swivel lock down
and slide to the right to lock the wheel
forward for running/jogging.
8 Rotate front wheel until it clicks into
locked forward position.
WARNING:
• Front wheel must be locked in jogging
position.
• Child must be buckled in the -5point
harness.
• When loading and unloading child, lock
the front wheel in a fixed position.
• Do not engage or disengage the swivel
lock while the stroller is in motion.
ALIGNMENT FEATURE
9 Should the stroller pull to one side while
the front wheel is locked in the fixed
position, use the alignment knob to align.
If the stroller pulls to the right, turn the
knob left to adjust. If it pulls to the left,
turn the knob right to adjust the stroller's
alignment.
REAR WHEELS
10 Installation
• Align the rear wheel axle with the
wheel mount on the stroller frame and
insert it into the wheel mount until it
locks into place. You will hear a click.
• Gently pull on the rear wheel to make
sure it is properly attached.
11 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount.
PARKING BRAKE
12 To lock the brakes: push the brake
pedal down to engage the brakes.
13 To release the brakes: lift the brake
pedal up.
WARNING: Lock the parking brakes
before loading and unloading your child
12
and whenever the stroller is not moving.