EINHELL GE-PS 18/15 Li BL Manual De Instrucciones página 15

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
This cordless compact pruning chain saw is
designed for sawing trunks, branches, wooden
beams and boards etc., and for performing
crosscuts and longitudinal cuts. It is not suitable
for cutting any materials other than wood. This
pruning chain saw is not designed for tree-felling
purposes.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_GE_PS_18_15_Li_BL_NA_SPK7.indb 15 Anl_GE_PS_18_15_Li_BL_NA_SPK7.indb 15
EN
4. Technical data
Motor power supply: ............................ 18V
No load RPM: .............................................. 3300
Bar length ........................................................ 6"
Cutting speed at rated RPM: ....................189 ips
Oil bottle capacity: ................................... 1.7 fl oz
Chain pitch: ................................................... 0.3"
Chain gauge: ............................................. 0.039"
Drive links: ....................................................... 28
Weight (Tool only): .....................................2.4 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
5. Before starting the equipment
Warning!
Always remove the battery before making
adjustments to the equipment.
Danger! Do not fi t the battery until the chain saw
has been fully assembled and the chain tension
has been set. Always wear protective gloves
when working on the chain saw to protect yourself
against injury.
5.1 Fitting the bar and saw chain
•
Carefully unpack all parts and check that they
are complete (Fig. 2-3).
•
Undo the fixing screw of the chain wheel
cover (9) (Fig. 4).
•
Take off the chain wheel cover (8) (Fig. 5).
•
Lay the chain (14) as shown in the groove
which runs around the bar (15) (Fig. 6/Item A).
•
Insert the bar and chain as shown into the
mounting of the cordless chain saw. As you
do so, guide the chain around the chain
wheel (Fig. 7 and 8/ Item B).
- 15 -
15.11.2023 13:05:01 15.11.2023 13:05:01