Descargar Imprimir esta página

Bosch Drive Unit Performance Line CX Instrucciones De Servicio Originales página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Notes on cycling with the eBike system
When does the drive take effect?
The drive assists your cycling only when you are ped-
aling. If you do not pedal, the assistance will not work.
The drive output always depends on the pedaling
force and cadence that you apply.
With lower force applied or a less frequent cadence,
the assistance provided will be lower than that sup-
plied at higher force or a more frequent cadence. This
applies irrespective of the assistance level.
The drive automatically switches off at speeds over
20 mph. When the speed falls below 20 mph, the
drive automatically becomes available again.
An exception applies to the push assistance function,
in which the eBike can be pushed at low speed with-
out pedaling. The pedals may rotate when the push
assistance is in use.
You can also use the eBike as a normal bicycle with-
out assistance at any time, either by switching off the
eBike or by setting the assistance level to OFF. The
same applies when the eBike battery is drained.
Interaction of the drive unit with the gear-
shifting
You should shift through gears on an eBike in the
same manner as when using a normal bicycle (ob-
serve the operating instructions of your eBike with re-
gard to this point).
Irrespective of the type of gear shifting, it is advisable
that you briefly reduce the pressure on the pedals
when changing gear. This will aid gear shifting and re-
duce wear on the powertrain.
By selecting the correct gear, you can increase your
speed and range while applying the same amount of
force.
Test the range of your eBike in different conditions
before planning longer and more demanding trips.
Read and understand the influences on the oper-
u
ating range when planning your ride (see "Influ-
ences on range", page English – 11).
Bosch eBike Systems
Influences on range
The range is affected by a number of factors, such as:
– Assistance level
– Speed
– Gear shifting behavior
– Tire type and tire pressure
– Age and condition of the eBike battery
– Route profile (gradients) and conditions (road sur-
face)
– Headwind and ambient temperature
– Weight of eBike, rider and luggage
For this reason, it is not possible to predict the range
accurately before and during a trip. However, as a
general rule:
– With the same assistance level on the drive: The
less energy you need to exert in order to reach a
certain speed (e.g. by changing gears optimally),
the less energy the drive will consume and the
higher the range per battery charge will be.
– The higher the selected assistance level under oth-
erwise constant conditions, the smaller the range
will be.
Note: Plan your routes so that you can always reach
your destination without drive assistance.
English – 11
0 275 U07 3SC | (09.03.2023)

Publicidad

loading