Publicidad
Idiomas disponibles
Idiomas disponibles
Note: The available modes are dependent on the re-
spective drive unit.
The designations and configuration of the assistance levels can
be preconfigured by the manufacturer and selected by the bicy-
cle retailer.
Adjusting the assistance level
The assistance levels can be adjusted within certain
parameters using the eBike Flow app. You therefore
have the option of adjusting your eBike to your per-
sonal requirements.
Creating a mode that is totally your own is not possi-
ble. You can only adjust the modes that have been en-
abled on your system by the manufacturer or the
dealer. This may even be fewer than 4 modes.
It may also be the case that a mode cannot be ad-
justed due to restrictions in your country.
The following parameters are available to you for ad-
justment:
– Support in relation to the basic value of the mode
(within the legal specifications)
– Response behavior of the drive
– Throttling down speed (within the legal specifica-
tions)
– Maximum torque (within the framework of the drive
limits)
Note: Please ensure that your changed mode retains
the position, name and color on all on-board comput-
ers and operating elements.
Interaction of the drive unit with the gear-
shifting
You should shift through gears on an eBike in the
same manner as when using a normal bicycle (ob-
serve the operating instructions of your eBike with re-
gard to this point).
Irrespective of the type of gear shifting, it is advisable
that you briefly reduce the pressure on the pedals
when changing gear. This will aid gear shifting and re-
duce wear on the powertrain.
By selecting the correct gear, you can increase your
speed and range while applying the same amount of
force.
Bosch eBike Systems
Therefore, follow the gear-shifting recommendations
that are displayed to you on your on-board computer.
Switching bike lights on/off
Before starting each journey, check that your bike
lights are working correctly.
To switch on the bicycle lights, press the bicycle
lights button (5) for more than 1 s.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The maximum speed of the push assistance is
3.7 mph. The manufacturer's default setting can be
lower and may need to be adjusted by the bicycle re-
tailer.
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
If the selected gear is too high, the drive unit
u
may not be able to move the eBike or activate
the roll-away lock.
To start walk assistance, press the walk assis-
tance (6) button for more than 1 s, keep it pressed
and follow the instructions on the display.
To activate push assistance, one of the following ac-
tions must occur within the next 10 s:
– Push the eBike forward.
– Push the eBike backward.
– Perform a sideways tilting movement with the
eBike.
After activation, the drive begins to push and the indi-
cator on the display changes.
If you release the push assistance button (6), push
assistance is paused. You can reactivate push assis-
tance within 10 s by pressing the push assistance
button (6).
If you do not reactivate push assistance within 10 s,
push assistance automatically switches off.
Push assistance is always ended if:
– the rear wheel jams;
– the bicycle cannot move over ridges;
English – 11
0 275 U07 3RP | (29.06.2023)
Publicidad
