Siemens SIMATIC ET 200SP Manual De Sistema página 333

Aprobación cULus HAZ. LOC.
Underwriters Laboratories Inc.:
• UL 508 (Industrial Control Equipment) O BIEN UL 61010-1 y UL 61010‑2‑201
• CAN/CSA C22.2 No. 142 (Process Control Equipment) O BIEN CAN/CSA C22.2 No. 61010-1
y CAN/CSA C22.2 No. 61010-2-201
• ANSI/ISA 12.12.01
• CAN/CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Installation Instructions for cULus haz.loc.
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known
to be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class
I, Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
CSA
CSA C22.2 (Industrial Control Equipment Motor Controllers)
UL
UL 60947-4-2 Low-Voltage Switchgear and Controlgear
Homologación FM
Factory Mutual Research (FM):
• Approval Standard Class Number 3600, 3611, 3810
• ANSI/UL 121201
• ANSI/UL 61010-1
• CAN/CSA C22.2 No. 213
• CAN/CSA C22.2 No. 61010-1
APPROVED for use in Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Sistema de periferia descentralizada
Manual de sistema, 11/2023, A5E03576852-AN
Datos técnicos
16.3 Marcado y homologaciones
333