hafele DT 600 Manual De Instrucciones página 16

1.3 Personnel
qualifications
1.4 Exclusion
of liability
2. Information about the product
2.1 Correct purpose
of use
16
Furthermore, the operator is responsible for ensuring that the access control
system is always in perfect technical condition. The following therefore applies:
• The operator must ensure that the maintenance intervals specified in these
instructions are followed.
• The operator must have all safety devices inspected regularly for function and
completeness.
The operator has the following obligations:
• The operating instructions as well as the installation and maintenance
instructions must always be ready to hand for the specified groups of people.
• The groups of people must read the parts of the instructions that are relevant to
them before using the product.
• Users of the locking systems that do not have access to the operating instructions
(hotel guests, patients etc.) must be shown how to use the product properly by
the operator.
• The instructions must be kept until the product is disposed of, and handed to
the new operator in the event of a change of operator.
• Any abuse of the keys must be prevented.
• The programming and clearing keys must be kept in a safe place, since
unauthorised persons can gain access to rooms with both keys.
Installation and start-up personnel
Installation and initial start-up may only be carried out by trained experts.
Personnel who are being trained may only install and start up the product under
supervision or after being authorised to do so by someone with experience.
The operator and the installer are personally responsible for compliance with the
VDE regulations (and the national electrotechnical and electronics regulations).
Operating personnel (personnel with locking authorisation)
The operating personnel must be informed about the following:
• Safe and proper handling of the product
• the emergency opening facility
• responsible use of locking authorisation to rooms occupied by other persons
Service and maintenance personnel
Cleaning work on the product may be carried out by the operating personnel
(after obtaining authorisation from the operator).
The batteries must only be changed by trained experts that have been deployed
by the owner. Other maintenance work is not permitted.
No liability is accepted for injuries or damage that is attributable to one or more
of the following reasons:
• abuse of the equipment
• negligent handling of the product
• failure to read and/or follow the instructions
• inadequately qualified / instructed personnel,
The product is an electronic door fitting for use in hotels, hospitals and other
buildings with frequent changes of room occupant.
The operator must equip the relevant doors with a profile cylinder for emergency
opening in the event of faults or emergencies.