Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
• Download the app Smart Life to your
smartphone from the iOS Appstore or
Android Play Store, or scanning the QR
code (see image 19, page 9)
• If you do not have an account, create
one or log in with the SMS verification.
• To connect the air Conditioner to the
mobile device, press the "Speed" button
for 7 seconds so that the appliance
enters the Wi-Fi mode. Each time that
you press this button for 7 seconds the
flashing speed of the icon will alternate
between fast and slow.
• Open the Smart Life app and tap on the
icon "+" on the top right corner, or tap
"add device", in the centre of the screen.
See image 20 on page 9.
• Here you must select the category "Big
appliance" (5th category), and within
this category you have to select the
product "Air Conditioner Controller
(WiFi). See image 21 on page 9.
• Select you WiFi network (it must be
2.4 Ghz) and enter your password. See
image 22 on page 10.
• Make sure the indicator light on the
portable air conditioner is flashing
rapidly (twice per second). If it is
flashing slowly or if it does not flash at
all, press again the "Speed" button
for 7 seconds.
• Make sure that the light is flashing as
indicated and continue. See images 23
and 24 on page 10.
• The device will start the pairing process
and will connect to the app. See image
25 and 26 on pages 10 and 11.
• Once the air Conditioner has been
successfully connected it will show on
the main page. Tap on it to access the
control panel of the device. See image
27 on page 10.
Note:
• The device can be controlled using
the app when it´s connected. If it is
not connected, you must turn it on to
control it.
• You can control several devices at the
36
same time, as if they were just one
device by creating a group.
Operation sound
The device will "beep" every time you make
an adjustment.
APP Controls
• Once you have connected the product to
the APP you will be able to control the
following functions (see images 28 to 41
on pages 11 and 14):
• Temperature
• Switch on and off
• Mode
• Fan
• Oscillation
• Night mode (Only available for the cold
and warm modes)
• Turbo mode (Only available for the fan
mode)
• Timer
• Programming
Access "My profile" where you can manage
other aspects of the product. See images
39,40 and 41 on page 14.
WEEKLY PROGRAMMING
This mode is only available in the APP.
• Enter the control panel of the device
and tap on "Program"
• A button to add a program will show up.
Tap on it. See image 34 on page 13.
• Here you will be able to pick the days
and times in which you would like the
program to repeat (the command might
be switching on or off the appliance).
See image 35 on page 13.
Note: When you turn the appliance on,
the last mode set before turning it off will
activate by default.
• You can also add comments and
activate or deactivate an execution
notice.
• You can save several programs and
activate, deactivate or change them
whenever you want.
To set the power-on and power-off time
Publicidad
