Publicidad
Idiomas disponibles
Idiomas disponibles
4.
in Pythagorean Theorem measuring mode, you can clear the measured side
length of the right triangle by pressing the CLR key after measuring it. The hy-
potenuse and the calculated side length of the right triangle cannot be cleared. If
you take an incorrect hypotenuse measurement,
you can re-measure it.
NOTES: In Area, Volume, Pythagorean Theorem measuring mode, when all the
measurements
are cleared, press the CLR key again, it will go back to single dis-
tance measurement mode°
This laser measuring tool has been designed to be a low-maintenance
tool.
However, in order to maintain its performance,
you must always follow these
simple directions_
,,
Always
handle the too! with care. Treat it as an optical device, such as a
camera or binoculars.
•
Avoid exposing the tool to shock, continuous
vibration
or extreme hot or
cold temperatures.
o
Always
store the tool indoors. When not in use, always store the tool in its
protective
case.
_, Always
keep the tool free of dust and liquids. Use only a clean, soft cloth
for cleaning.
If necessary,
slightly moisten the cloth with pure alcohol or a
little water°
,,
Do not touch the lens with your fingers.
o
Check the batteries regularly to avoid deterioration.
Always
remove the batter-
ies from the tool if it is not going to be used for an extended period of time.
o
Replace the batteries when the battery icon displayed
on the screen is con-
tinuously
empty.
,,
Do not disassemble
the laser measuring toot; this will expose the user to
hazardous
radiation
exposure.
Do not attempt to change any part of the laser lens.
48298
ManuaLRevised_07-9225
Page 16
Publicidad
