Descargar Imprimir esta página

Craftsman 320.48298 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

LCD DISPLAY
Full battery indicator
Empty battery indicator
_
aser beam indicator
_
Area measurement
_
Volume measurement
[_
Pythagorean
Theorem
measurement
Indicates that the measurement
is taken from the rear of the tool.
Indicates that the measurement
is taken from the front of the tool.
"Your laser measuring tool is a precision instrument.
Please observe the following
guidelines to ensure optimal performance.
o
0
Do not direct the laser-measuring
tool towards the sun or other sources of
bright light° This may cause an Error reading or inaccurate
measurements.
Do not use the laser measuring
tool as a leveling
tool.
Do not operate the laser measuring tool in wet, dusty, sandy, or other adverse
environments,
Such conditions
may damage inner components
and affect
measuring accuracy.
When the laser measuring tool is brought into a warm environment
from very
cold conditions,
or vice versa, allow it to come to the surrounding
tempera.-
ture before use.
Measuring errors can occur when measuring toward colorless
liquids (e.g.,
water), clean glass, Styrofoam,
or similar translucent
or low-density
materials.
High-gloss
surfaces will deflect the laser beam and result in Error
measurements.
Very bright surroundings
combined
with a very low reflecting surface will
reduce the measuring range and accuracy,
Do not immerse
the tool in water,
Wipe off dirt with a damp,
soft cloth.
Do not
use aggressive
cleaning
agents
or solutions.
Treat the optical
surfaces
with
the same
care that you would
apply
to eyeglasses
or cameras,
The accuracy of the tool must be checked before use after it has been
dropped or subjected to other mechanical
stresses.
48298 ManuaLRevised_0743225
Page 7

Publicidad

loading