Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The DELTAsingle meter is designed to measure and
register active electric energy. The meter is mainly for
mounting in distribution boards and small enclosures.
Installation
The instructions in this manual and those on the DELTA-
single meter are to be followed carefully. Do not operate
the meter outside the technical specification. Installation
and commissioning must only be carried out by authorized
electrical installers.
The installer is responsible for a correct and safe instal-
lation of the meter.
Product information
This table and sketches 1 and 2 show the DELTAsingle
meter parts.
1 Set button
2 Scroll button
3 Product label
4 Wiring guide
5 LED
6 Terminal block
7 Sealing points ( 4 )
8 LCD
9 IR port
10 Sealing label
11 Terminal
12 Terminal identification
13 Pulse output (optional )
14 Strip guide
15 DIN rail locking
16 LED frequency
38
Publicidad
