ABB DELTAsingle Manual De Instrucciones página 44

To move to set mode, press
mode to alternative mode, or to return to normal mode
from any other mode, press
In normal mode and alternative mode the information is
"rotating" automatically. Push
The symbol shows, to indicate that you are in
manual stepping. The
meter is in alternative mode. The meter returns auto-
matically to normal mode after 2 minutes of inactivity.
The table below shows the information given in the
different display modes.
Normal mode
Text
displayed
Value
Value,Tx
Alternative mode
Text
displayed
All symbols -
Err xxx
Value
Value, Tx
Adr xxx
Date
Time
Unit Display information
kWh Total active energy
consumption (Sketch 6)
kWh Active energy consumption -
per tariff (Sketch 6)
Unit Display information
LCD test
- Error codes
kWh Total active energy
consumption, with one
decimal. (Sketch 7)
kWh Total active energy
consumption per tariff,
with one decimal. (Sketch 7)
- Primary address
- Date set
- Time set
S
. To move from normal
.
LSc
for manual stepping.
Sc
symbol goes on when the
42
Default setting
-
Default setting
-
No Err
-
-
Adr 000
-- -- --
--:--:--