Publicidad
Idiomas disponibles
Idiomas disponibles
Location
•
The unit should be placed on a stable, solid surface to minimize
noise and vibration. Ensure that the surface is level, smooth and
sufficiently load-bearing to support the unit.
•
Although the device has casters that make it easier to move, it
should only be moved on smooth, level surfaces. Be especially
careful when moving it on carpeted floors to avoid damaging the
floor. Avoid rolling the device over obstacles.
•
The device must be placed near a properly grounded outlet.
•
Make sure that there are no obstacles near the air inlet or air outlet
openings of the device.
•
For efficient performance, maintain at least 18 inches (45 cm) from
the wall.
•
If you must extend the hose, be sure to keep the length to a minimum. Avoid sharp
bends or slack in the hose.
CONTROL PANEL AND REMOTE CONTROL
1. timer key
2. fan button
3. increase key
4. display
5. "Decrease" key
6. mode button
7. ON/OFF button
SWITCHING ON THE DEVICE
Insert the power plug into the power outlet to put the device
Press the On/Off key
used that was active when it was switched off.
to switch on the device. The device displays the last function
217
A. Cooling indicator
B. Dehumidify indicator
C. Fan indicator
D. Timer indicator
into
standby mode.
Publicidad
