Publicidad
Idiomas disponibles
Idiomas disponibles
CHECKS AT THE BEGINNING OF THE SEASON
Make sure that the power cord and plug are undamaged and that
the grounding system is working properly.
Follow the installation instructions carefully.
END OF SEASON MEASURES
To completely drain
Drain the remaining water into a bowl.
After all the water has drained, replace the lid.
Clean the filter thoroughly and allow it to dry completely before reinserting it.
PROBLEM
The device
does not turn on
The device
works only for a short
time
The device
works but not
cool the room
START AND END OF SEASON
the
internal circuit, remove the lid.
ERROR SEARCH
CAUSE
- There is no power
- It is not connected to the mains
- The internal safety device has
tripped
The exhaust air hose is not
routed correctly
Something prevents the
Air from the outlet
Windows, doors and/or curtains
open
There are heat sources in the
room (stove, hair dryer, etc.)
The exhaust air hose is removed
from the unit
The technical specification of the
device is not suitable for the
room in which it is installed.
SOLUTION
- Wait
- Connection to the mains
- Wait 30 minutes, if the problem
persists, contact your dealer or our
service center.
Lay exhaust air hose correctly,
keeping it as short and free of
curves as possible to avoid
bottlenecks
Check and remove any obstacles
blocking the air outlet
Close doors, windows and
Curtains, taking into account the
"Tips for the correct application"
given
via
Eliminate the heat sources
Insert the exhaust hose into the
housing at the rear of the unit
224
Publicidad
