Safety System; Turning Off A Burner; Output Levels - Bosch HSE-S7F4V30 Instrucciones De Funcionamiento

Safety system

Ignition
Thermocouple
sparker

Turning off a burner

Output levels

24
Depending on the model, your cooktop may have a
safety system (thermocouple) that stops gas from flowing
if the burners accidentally turn off. To ensure that this
system is activated, turn on the burner as normal and,
without releasing the knob, hold the control knob down
firmly for 4 seconds after lighting the flame.
Turn the corresponding control knob clockwise to the 0
setting.
The progressive control knobs can be used to adjust the
output level from lowest to highest.
Setting Û
High flame
—
Low flame ˜–
For dual double-flame burners, the inner and outer
flames can be adjusted separately.
The following output levels are available:
Inner and outer flame at maximum output
Outer flame at minimum output, inner flame at
maximum output.
Inner flame at maximum output.
Control knob off
Maximum output or aperture and power on
Minimum output or aperture