Publicidad
Idiomas disponibles
Idiomas disponibles
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal
injury may result.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
3.
Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
Electrical Safety
Power tool plugs must match the outlet.
1.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
Guide bar length
Cutting length
Part No.
Pitch
Gauge
Type
Number of teeth
Pitch
33
200 mm
(8")
171 mm
(6-3/4")
161848-6
Sprocket nose bar
2.
Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body
is earthed or grounded.
3.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
5.
When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
If operating a power tool in a damp
6.
location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of
electric shock.
Personal Safety
1.
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influ-
ence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal
injury.
3
ENGLISH
90PX
40
250 mm
300 mm
(10")
(12")
235 mm
292 mm
(9-1/4")
(11-1/2")
161846-0
165245-8
3/8"
1.1 mm
(0.043")
6
3/8"
46
Publicidad
