Descargar Imprimir esta página

Beurer BM 64 Manual De Instrucciones página 33

Ocultar thumbs Ver también para BM 64:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

7. CLEANING AND MAINTENANCE
• Clean the device and cuff carefully using only a slightly damp
cloth.
• Do not use any cleaning solutions or solvents.
• Under no circumstances hold the device or cuff under water,
as this can cause liquid to enter and damage the device and
cuff.
• If you store the device and cuff, do not place heavy objects on
the device and cuff. The cuff line should not be bent sharply.
• Remove the batteries if the device is not going to be used for
a long period of time.
8. ACCESSORIES AND/OR
REPLACEMENT PARTS
Accessories and/or replacement parts are available at
www.beurer.de, under "Service". Please state the corresponding
order number.
Designation
Item number and/or order number
Universal cuff
164.503
Mains adapter (EU)
072.78
Mains adapter (UK)
072.79
9. TROUBLESHOOTING
Error
Possible cause
message
Unable to record
a pulse.
The measured
blood pressure
is outside the
measurement
range.
There is a pneu-
matic system
error.
An error oc-
curred during the
measurement.
The inflation
pressure is
higher than
300 mmHg.
There is a
system error.
33
Solution
Please wait one minute and re-
peat the measurement. Ensure
that you do not speak or move
during the measurement.
Repeat the measurement.
Ensure that the cuff line is
correctly connected and that
you do not move or speak.
Please wait one minute and re-
peat the measurement. Ensure
that you do not speak or move
during the measurement.
Please take another measure-
ment to check whether the cuff
can be correctly inflated. Make
sure that neither your arm nor
other heavy objects are press-
ing on the line, and that the line
is not bent.
If this error message appears,
please contact Customer
Services.

Publicidad

loading