Cleaning And Maintenance - essentiel b ECHS 1502C Instrucciones De Uso

Model 8002458_CHAUFFAGE SOUFFLANT CÉRAMIQUE ESSENTIEL B
reference: ECHS1502c
Feature Symbol Value
Contact details: Sourcing & Création, Avenue de la Motte 59810 LESQUIN - FRANCE
use
IMPORTANT: Before using the appliance, it must be
placed on a flat and stable surface, otherwise the
anti-tilt cut-off device will prevent it from functioning.
1. Make sure the power selector knob (1) is in position "0", then connect the power cord to a
mains socket.
2. Select the desired programme by turning the selector knob (1):
0
I
II
The power consumption depends on the heating position selected ("I" or "II").
To improve energy efficiency, heat in position "II" first, then switch to position "I"
when the desired heat has been reached.
3. Select the room temperature by turning the control knob (2)
clockwise to position "+".
The power on indicator lights come on.
20
V.4.0
use
Unit Feature Unit
Remote control option
Adaptive activation control
Limitation of activation time
Black globe sensor
Switch off the appliance
Ventilation (ambient air)
750 W
1500 W
For the ventilation mode, turn the temperature control knob (2) to the maximum
position. In a lower position, the ventilation mode may not work.
no
no
4. If desired, set the on/off switch to "I" (on) to activate the oscillation. The appliance oscillates
yes horizontally. Set the switch to "0" (off) to interrupt the oscillation.
5. When the desired room temperature has been reached, the appliance stops working. It
no
restarts automatically when room temperature drops.
6. When you have finished, turn the temperature control knob (2) to position "-" and turn the
power selector knob to "0". The power on indicator lights go out.
7. Unplug the appliance.
Thermal safety:
If the event of overheating, the safety device is automatically triggered and the
appliance stops working. Set the program selector knob to position "0" (off),
unplug the appliance and allow it to cool down for approximately 10 minutes.
Then restart the appliance normally.

cleaning and maintenance

IMPORTANT:
Always unplug the power cord from the power
•
socket and allow the appliance to cool down before
cleaning or maintaining it.
Never immerse the appliance in water or any other
•
liquid.
The appliance requires regular maintenance for optimal operation:
Wipe the outer surfaces of the appliance with a soft, slightly damp cloth to remove dust and
•
dirt. Never use abrasive cleaning products (alcohol, solvent) on this appliance.
Remove dust from ventilation holes with a vacuum cleaner.
•
Make sure the appliance is completely dry before plugging it back in.
•
If the appliance is not going to be used for an extended period, turn off and unplug the
•
appliance, then store it in a clean, dry place.
21
V.4.0
use