Operating The Controls For Tilling - Honda FRC800 Manual Del Propietário

OPERATION

OPERATING THE CONTROLS FOR TILLING

If the tines dig in but the machine will not move forward, move the
handlebars from side to side.
Handlebar Height Adjustment
HEIGHT ADJUSTING BOLT
Stop the engine before adjusting the
handlebar height.
Remove the handlebar height
adjusting bolt, adjust the handlebar
height, and reinstall the bolt in the
appropriate holes.
HANDLEBAR LOCK NUT
Clutch
When the main clutch lever is
squeezed, the clutch is engaged, and
MAIN CLUTCH LEVER
power is transmitted to the
transmission.
DISENGAGED
When the lever is released, the
clutch is disengaged, and power is
not transmitted.
ENGAGED
23