Engine Oil; Engine Cylinder - Honda FRC800 Manual Del Propietário

STORAGE

Engine Oil

Change the engine oil (see page 35).

Engine Cylinder

1.Remove the spark plug (see page 41).
2.Pour a teaspoon [5cc (5cm
3.Pull the starter rope several times to distribute the oil in the cylinder.
4.Reinstall the spark plug.
5.Pull the starter grip slowly until resistance is felt and the notch on
the starter pulley aligns with the hole at the top of the recoil starter
cover. This will close the valves so that moisture cannot enter the
engine cylinder. Return the starter rope gently.
58
3
)] of clean engine oil into the cylinder.
STARTER GRIP
Align the notch on the starter pulley with
the hole at the top of recoil starter cover.