Linea 2000 DOMO DO7107S Manual De Instrucciones página 33

PARTS
1. Filling cap
2. Trigger for removing the water tank
3. Handle
4. Water tank
5. Steam release button
6. Soleplate
7. Temperature dial
8. Temperature indicator
9. Iron
10. Thermal insulation pads
11. Steam generator
12. Cord clamp
Trigger for removing the water thank
Grab the water tank by the handle and press and hold the button. You can now remove the
water tank from the generator.
Filling cap
Open the filling cap and use the opening to fill the water tank.
Temperature indicator
When the iron is heating up, the temperature indicator will be lit up. When the set
temperature has been reached, the light indicator will go out again. During ironing the
indicator will alternately light up and go out again, as the iron is being kept at the right
temperature.
Steam release button
Press the steam release button on the inside of the handle of the iron to spray a continuous
steam out of the soleplate. When you let go of the button, you will iron dry again, without
steam.
www.domo-elektro.be
6
10
12
1
2
3
4
5
9
7
11
8
33
DO7107S