Note: The pushers used to set the local time feature a pat-
ented safety lock that prevents inadvertent changes to the
local time setting. Before they can be actuated, they must
be unlocked with a quarter turn in the counterclockwise
direction. After setting the local time, lock the pushers
again with a quarter turn in the clockwise direction.
Unlock:
1 /4
turn counterclockwise
Lock:
turn clockwise
1 /4
10
CAUTION
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when
the crown is pushed home.
Your watch has two central hour hands
that move synchronously and can be either
superposed or separated in order to display
a second time zone.
The local time correction pushers can move
the local time hand clockwise or counter-
clockwise in one-hour step.
Before they can be actuated, the local time
correction pushers must be unlocked (¼ turn
counterclockwise).
Correction push pieces should be actuated
exclusively with the correction stylus that
was delivered with the watch. The use of
any other tool could damage your timepiece.
Do not perform any date correction between
10 p.m. and 2 a.m.
Every year, the date must be corrected five
times – at the end of each month that has
fewer than 31 days.
11