Descargar Imprimir esta página

EGO CS2000 Manual Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Personal Safety
Stay alert, watch what you are doing and use common sense when
operating a machine. Do not use a machine while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating machines may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the machine. Carrying machines with your finger on the switch or
energizing machines that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the machine on.
A wrench or a key left attached to a rotating part of the machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the machine in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of machines allow you
to become complacent and ignore machine safety principles. A careless
action can cause severe injury within a fraction of a second.
Machine Use and Care
Do not force the machine. Use the correct machine for your application.
The correct machine will do the job better and safer at the rate for which it was
designed.
Do not use the machine if the switch does not turn it on and off. Any
machine that cannot be controlled with the switch is dangerous and must be
repaired.
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
7

Publicidad

loading

Este manual también es adecuado para:

Cs2000-fc