Publicidad
Idiomas disponibles
Idiomas disponibles
English
A5E41143327-AD
4AI I 2WIRE HART, 6ES7134-7TD00-0AB0
Product information leaflet
This product information leaflet contains important information
about the electronic module 4AI I 2WIRE HART.
Characteristics
• The electronic module is used to measure currents with 2-
wire transducers and HART field devices
• The electronic module is plugged into the
TM-IM/EM or TM-EM/EM terminal module.
Further information
Further information about the electronic module is provided in
the SIMATIC Distributed I/O ET 200iSP manual.
This manual can be requested from the Siemens
representative or office in your area or free-of-charge on the
Internet at:
https://support.industry.siemens.com/cs/ww/en/my
Maintenance
The electronic module is maintenance-free. For repairs, you
need to send the electronic module to the manufacturing
location. Repairs may only be carried out there. If problems
occur, please contact your local Siemens office:
https://support.industry.siemens.com/cs/ww/en/sc
English
Publicidad
